Film/Sheet Equipment

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
130mm OMP/Prealpina Pelletinzing Line. New Low Price - 130 mm Prealpina Pelletizing Line....call for complete specs - great photos - fantastic video - under power in plant.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: PAKISTAN, LAHORE PUNJAB
Twin Screw Extruder. Brand New Twin Screw Conical Extruder for Pipes & Profiles Model : RON-80contra Type : Conical Twin Extruder Screws & Barrel : Contra Series Screw Size : 80/156mm , Super Conical Type Screw Barrel : Special Alloy Treated, Best Quality Gear Box : RON Branded, High Torque & Abrasion Resistant Main Motor Installed AC : 55kw, Siemens or Equivalent Out Put : 250-350kgs/hour *depends Upon Size & PVC Material Used AC VFD Invertor Drive : ABB or Delta, Taiwan Feeder AC Gear Motor : 1.5kw Feeder AC Invertor : ABB or Delta, Taiwan Barrel Vacuum Port : 2.2 kw, Vacuum System Installed on Barrel Total Power : 94 kW together Equipped with Twin Dosser Feeder with Hopper made of Stainless Steel or Optional : Single Screw Dosser Feeder (as on customer demands) Barrel Air Cooling : 04 Blower Fans, 550watts, rpm High 2500 rpm Temperature Controllers : 12 Brand, Japan Made (with Amp Meters) Optional : PLC Controlled (extra cost will be added in below given price) Hopper : 155 kgs Capacity Adopter : Available Best Alloy Steel Material Adopter Clamps : 03 pcs Present Color : Red & White or as per customer’s requirement Extruder Weight : 5000 kgs approx

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Cumberland Model 1420 Granulator. Cumberland #1420 Granulator - 30 HP motor - 14" x 20" Opening - 3 knife open rotor - with a feed hopper - 3/8" screen, air discharge.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Cumberland Model # 1620 Granulator - 50 HP motor. Cumberland Model 1620 Granulator - 50 HP motor - 16" x 20" Opening - 3 Knife Open Rotor - 2 Bed Knives - 3/8" Screen.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Rapid Granulator Model 1831C - 60HP. Rapid Granulator - 18" x 31" Opening - 60 HP motor - 3 knife open rotor - 2 bed knives, option of a third bed knife, 3/8" screen - Completely Refurbished !!! Like New !

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Cumberland 50B 7knife (Film) Grinder. Cumberland #50B Film 7 Knife Grinder 50″ x 20″ Opening 100 HP motor 7 Knife Open Rotor

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Herbold Dual Wash Line . Herbold Dual Wash Line The system consists of two (4,500 pound/hour) cold water Herbold wash/grind lines. They share a single water treatment system which filters particulate (<250 micron) and recirculates the water for reuse. There is a 1,750 cu ft. (approx 45 K lbs. capacity) blending silo available as well. The company processed PE & PP post-consumer plastic containers and fed them into the line as whole bottle which pushed the rate/hour to about 3,500-3,800 lbs./hour each. The system was only in use for 22 months before being idled – 2017. Herbold Wash Line Components (2 Identical Lines) Each Line Consists Of: Heavy Material Sink Wet Grinder Friction Washer #1 Densification Separation Friction Washer #2 Turbo Dryer Aspirator Sizing Screens Bag Fill Stations Also Included Blending Silo/Surge Silo

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Herbold/Ramco 24x35 Granulator w/10 ft. tall hopper!. Herbold/Ramco Model 2436 Granulator – HEAVY DUTY – Completely Refurbished 24″ x 36″ Opening – 3 Knife Open Rotor, 2 Bed Knives, large/tall feed hopper (10 feet tall) 125 HP motor – Air Discharge – It has been completely refurbished including new bearings, new blades, bolts, etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
72mm Cincinnati Twin Screw - Argos 72R-47-50-1100-UL-28D - New 2007. 72mm Cincinnati Parallel Twin Screw Extruder Argos 72R-47-50-1100-UL-28D – New 2007 Consisting of: Machine frame, control cabinet, control unit EXcPRO-XP touch with operation station OSA, main motor, vacuum pump, gear box and barrel. 72 mm – 28:1 L/D Ratio – 75 HP Motor – max Screw Revolution: 49.82 U/min. – Max. melt pressure (permanent) 450 bar – Number of heating/cooling/adapter zones – 6/4/1 – AC Motor – EXc Pro XP Control – Downstream Interface CAN + CIMI 1 Hours on machine: 16,500 – no plastics used on this machine – R & D

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Vecoplan RG62/150 SPK FF (Film & Fiber Rotor) New 2009. Vecoplan RG62/150 SPK FF Film & Fiber Single Shaft Shredder – New late 2009!!! Film and Fiber Rotor – 15″ Diameter – 150 HP motor 480 volt with hydraulic pump to run the hydraulic ram, and Flenders Gear Box. Special Option of Hard Face Rotor -(Rotor has cooling – but the company never needed to use it for material they were doing) low hours! 74 Cutters with 48 Nip Cutters – Shredder on 16″ high base, which can be taken off if desired. just bolts on. Complete with Control Panel, with extra holes for accessories if needed. Outboard bearings. Dimensions: 180″ Long 125″ wide and 78″ High without hopper – hopper is 4o” High and top of hopper is 96″ wide x 112″ long. Ram Opening is 10″ deep x 63″ wide and moves along 63″ long rotor. This is a Hard Face V-Groove Rotor and in good shape – no wear!!! Comes with 4 screens -1 2″ – 1 1/2″ – 3/4″ – comes with spare cutters – rails and wipers were changed. Comes with 20 foot long out feed conveyor – 5 feet high – and 23″ belt that flares out to 32″ wide, and 64″ wide at end where the drive is and is inclined as the shredder was on a base. Manuals.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Conair/Gatto UC-4-18 Up-Cut Traveling Saw. Conair Gatto Traveling Up Cut Saw – Model UC-4-18 Serial # 9414783 1 HP 3/4 HP Dust Collector

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Erema RM TVE 100 Complete Pelletizing Line. Erema TVE100 Pelletizing Line – New 2000 100 mm (4″) Extrude driven by 132 Kw AC Motor Electrically heated & water cooled barrel Dual vent EREMA steel vacuum pump EREMA series 988 Instruments for temperature control Eisenbliss EG250 Gearbox includes approx 33 CF stainless steel cutter compactor Extrusion Line reconditioned in 2013 w/new screw and motor – Cutter compactor is feds by 33″ wide x 20′ long inclined conveyor – Extruder equipped with approx. 40 hole sinlge row die plate with 4 blade cutter head Water ring pelletizing system -Continuous backflush screen changer water pump and heat exchanger for barrel/pellet cooling stainless steel slushway w/vibrating screen/classfier Pellet drying centrifuge.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Erema PC 1109 - (Stand Line) New 2006 . Erema Model PC 1109 Pelletizing System New 2006 Infeed Belt Conveyor with Model FB6000/900 with Metal Detector, Enlarged Cutter Drum, With Liquid Cooled Extruder – Double Vented, Cutter Compactor Motor 75 Kw, Extruder Motor 104 Kw, Siemens-Simatic Touch Screen Control, Automatic Self Cleaning Screen Changer, Model SW4/134RTF, Automatic Water Slide Strand Pelletizing System, Model ASP 120, with Water Circulation Pump, De-Watering Screen Miodel GS 1500, Pellet Dryer, and Vertical Mixing Silo (10 Cubic/Meters) with Mixing Auger. Currently with two screws. 520-820 Kg/Hr. Depending on material.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ATLANTA GEORGIA
guillotine. double cyclinders. 150 MT cutting power.good for pallets, drums, etc plastic containers cuttings.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ATLANTA GEORGIA
Nelmor Granulator. 45HP Nelmor Granulate for sale with new motor

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Gala 7 MUP Complete Peleltizing System. Complete with Water Box, Spin Dyer

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: USA, ROCKVILLE CENTRE NEW YORK
Actual Puller/Saw Combo. Actual Puller/Saw Combo: 120" contact length x 9" wide cleats - Decking - can put a 12" up to 23" wide board through it

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---